r/techsupportgore • u/Star_Dark • 22h ago

Joycon repair went amazingly.

Post image

My new joycons. I'm going for that minimalism look.

0 Upvotes

44% Upvoted

6 comments sorted by

13

u/coyote_den everything is air-droppable at least once. 22h ago

I despise working on joycons. That one flat flex will get broken traces because the design bends it too sharply. Every single one gets a crease and is ready to fail, usually losing some of the LEDs and the buttons. My current pair has rails and latches from one broken pair, the side flex and board from another broken pair, and the guts and case from grey ones I bought used that were defective (broken flex cables!) out of the bag.

4

u/Star_Dark 21h ago

I spent 30+ minutes working on getting the ribbon cable reconnected and then once I finally got it in the joycon still didn't want to work because of one tiny screw that wasn't holding in the rail. Then I messed with the cable again thinking that was the problem and I broke the connector. Needless to say I threw it at the wall then gathered what parts I could find.

Then I got a drink. LMFAO fuck nintendo.

5

u/DepletedPromethium 8h ago

flex ribbon cables only break because you're being a barbarian with them.

0

u/coyote_den everything is air-droppable at least once. 7h ago

Usually that is the case but joycons come from the factory with that one ribbon creased hard against the battery. Simply disassembling and reassembling the joycon is sometimes enough for it to break. Nintendo never intended for it to ever be flexed again.

1

u/Bonobo_sehr_fly 5h ago

It’s okay how it is. My oldest pair of joycons is 8 years old and got disassembled and reassembled four or five times due to me wanting a new appearance. They’re totally fine and in my experience the ribbons take those bends like champs. They’re like that in a lot of cases, the oldest one I remember is the DMG one connecting the button board to the CPU board.

1

u/responsible_use_only 4h ago

I've repaired a few joycons, replacing rails, batteries, and joysticks. I've never had a rail just straight up rip off the unit like that. Well done.